Nick MacKechnie
#8 wire kinda guy.....

Creating a community – #NZTweeters T-Shirts

Wednesday, 14 April 2010 03:47 by Nick MacKechnie

Hi All,

I had Twitter t-shirt created for me by a crowd called 140tees.com. I had some great feedback, and thought others may be interested in a NZ community Twitter T-shirt. With this in mind, I have created a nztweeters account. Click on he following link to customise and order your T-shirt.

Capture01

Capture02

There’s a heap of different shirts that you can choose from, simply select the type and colour that floats your boat. :-)

Capture03

So I just ordered mine, I’ll let you know when it arrives

designallCA4CP3ZO

Currently rated 5.0 by 2 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

DIY Digital Photo Frame

Thursday, 25 March 2010 10:08 by Nick MacKechnie

HI All,

Over the past few months, I’ve searched about for a decent digital photo frame to display our photos on. In New Zealand we seem to be limited to frames that have photos stored on a USB Stick/Flash drive, and it’s difficult to find photo frames that can be connected to a network in order to pull photos from a chosen source. The issue with this can be the ease at updating photos, and regularity of doing so – So I wanted to automate this as much as possible, and remove the need to physically “plug” something in.

Below is an old Toshiba Tecra S1 which has become the ‘brains’ of my Digital Photo frame.

DSCF8515 

I did a fair about of searching to see how others had converted laptops – Most had simply pulled the screen off the laptop, twisted the connecting cable between the laptop and the base, and then mounted it into some sort of case, typically a shadow box frame. I decided I wanted to completely remove the laptop from its casing make it look ‘pretty’ :-)

So with this in mind, I measured the full size of the main board, and screen area and depth of all the components, and visited a local framer – The Frame Workshop. He was very obliging, and did a stunning job for the modest sum of NZ$90.

Below is the view of the front of the frame – the black inlay is perspex, surrounded by wooden framing.

DSCF8517 

View of the frame looking from the inside –> out.

DSCF8518

I lined the lcd screen up with the edges of the perspex, and then hot glue was applied in large quantities to hold it in place. I then cut some square timber to place at the top and bottom of the screen (and glued with wood glue), to enable me to screw the 4mm hard wood on top.

DSCF8519

The next job was to attach the main board to the hard wood - the more challenging aspect was to find 2.5mm x 20 mm nuts and bolts. I finally managed to track them down, and secured the main board.

DSCF8531 

View from underneath.

DSCF8532

Main board now mounted securely into the frame.

DSCF8535

And finally attached the back to the frame.

DSCF8538External Power re-routed to the back, and holes drilled for power on/off and venting

DSCF8546 

Back of frame completed

DSCF8542

And Test – Yes.. still works, phew :-)

DSCF8521

I'm using Windows XP to drive the photo frame, and using the default ‘my pictures’ screensaver. The machine boots up and automatically kicks off the screensaver which selects a new photo every few seconds to display.

Here’s the batch file I use in Startup to kick it off.

@Echo off
%systemroot%\system32\ssmypics.scr /s

DSCF8528 DSCF8529

Now the useful part. As I mentioned in the beginning, one of the failings of most photo frames in my opinion, is the requirement to remember to grab the memory stick out of the side, and update the photos etc. What I wanted was the ability to update the photos from any machine I wanted, as well as while I travel via a mobile device (cellphone).  The frame has both a 10/100 network card and a wireless card and is always connected to the internet.

Enter Live Mesh. Mesh gives you the ability to add/remove photos (and files) from any Windows or Mac PC, as well as a Windows mobile cellphone.  So I simply created a mesh folder with my cellphone and a few of our machines and now when I add a new photo to one of the PC’s or my cellphone, it synchronised and updates the ‘photoframe’ – Job done!

 

Aben Samuel tweeted this on FB, so I decided to get a t-shirt printed :-)

26137_424266034552_529559552_5087683_1386878_n

Currently rated 5.0 by 4 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Noel Lemming - Extended Warranties Updated & Conclusion

Thursday, 4 February 2010 02:46 by Nick MacKechnie

Hi All,

I’ve always been the kind of person that prefers to buy higher end appliances, and purchase the extended warranty for piece of mind. I’ve never had to ‘claim’ before, however this week that changed, and the process to date has been very painful. We have a DVD Recorder which we use religiously for Home Theatre, recording a bit of TV etc and on Saturday it gave up the ghost. None of the buttons work, the remote was ignored, so it would seem that something has popped due to heat. So we’re 4.5 yrs into the 5 year warranty and it was time now to track down my invoice. I’m pretty particular about keeping such things, so before long I was happy to find it, and know I would be covered under the terms of the extended warranty. I popped down to the local Noel Lemming’s on Sunday, where I was told I had to contact the 0800 number during business hours (or I could do this online - www.nzclaim.com/noelleeming) in order to receive a valid claim number. I was told this could take up to 3 days before I receive one, and then I could take the unit to the appropriate repairer. I guess my bone of contention here is the fact that 1. I have to ‘wait’ to be approved for something under Warranty (This isn’t insurance is it?) and 2. I’m now into day three of waiting and I hadn’t heard anything back until I called again. I asked for a note to be added to the notes to say I had called yesterday and today and I will again today. Do they hope/assume that people mislay the paper work and never make a claim?

Has anyone else had this kind of experience?

I received this email after my phone call from them today – It’s from the Underwriter of the Warranty - International Underwriters Group - http://www.nzclaim.com/noelleeming. I guess it would be nice to know when purchasing the Warranty that it is ‘outsourced’, and when I asked how long it would take to have a resolution after reviewing the email, the answer was 3-5 business days. This seems a _long_ time for a company to do the right thing.

From: noreply@iugonline.com

Sent: Wednesday, 3 February 2010 2:23 p.m.

To: Nick MacKechnie

Subject: Claim Update - Reference Number: IUG-SXXXXXXXXXX

=====================================================

THIS IS AN AUTOMATED EMAIL – PLEASE DO NOT REPLY

=====================================================

Claim Reference Number: IUG-SXXXXXXXXXX

We have reviewed the information entered on the Contact Us and have the

following reply.

We are currently looking at all of our options first before making a decision

on your claim. We are currently awaiting for Noel Lemming to come back to us

to see what replacement they have available so we can make a decision, once

this has been made you will be notified of it. Thank you.

To contact us about any aspect of your claim

=============================================================================

1) PLEASE DO NOT REPLY TO THIS EMAIL

2) Go to www.nzclaim.com/noelleeming

3) Click the "Click here to enter" link

4) Click the "Existing Claim" link

5) Enter the Claim Reference number above together with your Last Name (this

must be the same name you entered when you first logged your claim).

6) Click on the "Contact Us" tab and complete the relevant sections

Thanks again and we look forward to assisting you further.

Regards

IUG Claims Department

www.nzclaim.com/noelleeming

0800 4 SUPERCOVER (478737)

I’ll update this post as things change... It seems like an awful process that doesn’t support customers who are loyal and I will most certainly think twice about purchasing goods from these guys again.

Update

Less than 30 minutes after posting this, and advising some key people in Sony and NLG/IUG, I received this:

From:    noreply@iugonline.com
Sent:    Wednesday, 3 February 2010 3:13 p.m.
To:    Nick MacKechnie
Subject:    Claim Repairer Details - Reference Number: IUG-SXXXXXXXXX

Follow Up Flag:    Follow up
Flag Status:    Flagged

================================================
THIS IS AN AUTOMATED EMAIL – PLEASE DO NOT REPLY
================================================

Claim Reference Number: IUG-SXXXXXXXXX

Repairer Details
================
Next Electronic Servicing Limited,
127 Antigua Street
, Addington, Christchurch 8002, New Zealand
Tel: 033662002

Return To Base Warranty Repairs
===============================
* Please deliver the faulty product to the repairer detailed above.
* Please attach details of your claim reference number to your faulty product.
To do this you can choose to print the summary page that appears when you have
completed logging your claim and attach it to the product.
* If you are sending by mail/courier you are responsible for all costs of
doing so and ensuring that it is suitably packaged to avoid damage during
transit.
* Please ensure that you quote the claim reference number provided when
discussing your claim with the repairer.

To check the current status or review your claim at any time
==============================================================
1) Go to www.nzclaim.com/noelleeming
2) Click the "Click here to enter" link
3) Click the "Existing Claim" link
4) Enter the Claim Reference number above together with your Last Name (this
must be the same name you entered when you first logged your claim).

Thanks again and we look forward to assisting you further.

Regards

IUG Claims Department
www.nzclaim.com/noelleeming
0800 4 SUPERCOVER (478737)

So I’ve now dropped the unit off for repair/diagnosis at Next Electronics, and I should know the status within 5 working days. Good progress, pity about the pain thus far! J

Final Update

Well yesterday, day 5, I received the following settlement offer from IUG for the DVD recorder I had purchased. The settlement price offered was the original purchase price in the form of a voucher at Noel Lemming.

From:    noreply@iugonline.com
Sent:    Wednesday, 10 February 2010 1:27 p.m.
To:    Nick MacKechnie
Subject:    Settlement Offer - Reference Number: IUG-SXM10341656

Follow Up Flag:    Follow up
Flag Status:    Flagged

=====================================================

  THIS IS AN AUTOMATED EMAIL – PLEASE DO NOT REPLY

=====================================================

Claim Reference Number: IUG-SXXXXXXXXX

Your faulty product is beyond economic repair, therefore we intend to offer
you a settlement in accordance with your extended service plan terms and
conditions.

=====================================================

Being happy with the settlement outcome, I drove down to the local Noel Lemming to have a look at the units available, so I could find a replacement unit. I was greeted by Ken (Sales consultant) in the Moorhouse Avenue branch and he showed me the options available.

The conversation led onto the challenges I had had in terms of getting to the point where I was today. Ken asked me if I would mind relaying my experience to the Sales Manager as this type of feedback was often heard second hand by him – so he introduced me to the Sales/Branch Manager (James Cuttance).

James was excellent, listened to my feedback and made it clear Noel Lemming took this type of thing seriously and would stand behind the Warranty in the event where the customer was unhappy with the outcome, or a party didn’t step up appropriately. He made a kind offer of me finding the unit I wanted and then making things right on the difference. I kindly thanked him for the offer, and explained that that wasn’t my intention of raising the issue – more so that if this would help others in a smother transaction over these types of claims in the future then this exercise would have been worthwhile.

For me as a consumer,  the experience of walking in with a proof of purchase to a Noel Lemming Store, having the unit accepted as being under warranty and then the rest of the process being hidden from me would have lead to a much better outcome from my perspective. There is nothing worse than felling like you’re being pulled from pillar to post, running around to various places, dealing with multiple people to drive aggravation. I understand the acceptance, approval, delivery to repairer, go/no go on repair etc has to happen, however I’m not so sure I have to be , or should be part of the process. From my perspective I bought the unit and Warranty from Noel Lemming, I don’t care about about the backend things that needed to happen.

Two other points that I’d like to mention –

1. Upon the approval of the settlement, IUG then send you a voucher in the post to the agreed value. This can take up to five days. From a customers perspective, why cant this be emailed to me and then presented to NL with an approval number or you are asked what your local NL branch is, and that they have been advised and your account has been credited (and they backend magic happens). Seems absurd that I have to wait 3 days for approval, another 5 potentially for repair/replacement/settlement and then potentially another 5 days to receive my voucher before most people will replace their purchase.

2.NL no longer sell 5 year extended Warranties – this has been reduced to 3 years. The cynic in me assumes that MTF (meantime between failures) is in the first x hours of use or after 3 years, and therefore the likelihood of a customer claiming is drastically reduced, therefore money for jam…

Right, on a more positive note, I ended up purchasing one of he Panasonic HD HD/DVD Recorders - Panasonic DMR-XW350.

Panasonic-DMR-XW350_1

Features & Benefits

Integrated Twin HD Digital Tuner

The DMR-XW350 features Twin HD Digital Tuners for your viewing & recording enjoyment. The integrated twin tuner allows for Digital broadcasting reception without the use of an external tuner incorporated into a set-top box. High quality digital television enjoyment has never been easier with a Panasonic Recorder. The hybrid digital tuner offers HD/SD recording.

VIErA Cast

The DMR-XW350 also supports the new Panasonic VIErA Cast, facilitating access to popular sites YouTube and Picasa through the DVD Recorder

7 Day EPG

The DMR-XW350 also supports 7 day Electronic Program Guide where transmitted by each broadcaster, 7 day EPG makes recording a breeze, simply select the program you wish to record by name rather than remembering days, dates and times.

HDMI Connection

With HDMI connection, recorded images are transmitted with no deterioration for high quality reproduction. Both video and audio signals are transmitted over a single cable, so connection is easier and there is less clutter in your home theatre cabinet or stand.

VIErA-Link for easy operation

With a single cable, HDMI enables transmission of not only A/V signals but also control signals. All you have to do to enjoy a new level of operation convenience is hook up to a VIErA or home theatre system with VIErA Link compatibility. When you want home theatre entertainment, for example, just press the VIErA-Link button on the remote. Power to all the components switches on, TV input and other settings are automatically adjusted, and the show's ready to begin. It's that easy.

New features include:
Auto Preset Download - Connect the Recorder to your VIErA TV via an HDMI cable, and the channel setting information is automatically downloaded to the Recorder as well as the aspect ratio of your TV.

Direct TV Record - If you want to record the program you're watching, you can start recording it quickly and easily by pressing the VIErA-Link button on the VIErA remote control and selecting "Direct TV Record" on the VIErA Link menu, recording starts almost instantly.

Pause Live TV - Pause Live TV lets you freeze TV  programs just like pausing a DVD, by selecting "Pause Live TV" on the VIErA Link Menu. The TV programs is temporarily save on the hard disk drive so you can watch the rest of the program , right from the stopped frame, at a later time. Alternatively you can press the "Pause" button on your Recorder remote and the channel you're watching is Paused for up to 8 hours.

250GB Hard Disk Drive

The built-in 250GB Hard Disk Drive lets you record an enormous amount of programming without using a DVD. With a massive 441 hours of capacity and editing capabilities, you can have the freedom to store a massive amount of your favourite programs. Should you wish to archive the information, you can easily record it to DVD.

2x Resolution in LP Mode

Our recorders provide exceptional recording quality. You can enjoy viewing extended recordings (4 hours, single-sided DVD-RAM/-R) with exceptionally detailed images and 2x the picture quality. The virtual multi encode system provides LP recording mode with 500 lines of horizontal resolution - twice the resolution of conventional LP recording mode.

500 Line Horizontal Resolution

4x Natural Gradation (12-bit Analogue to Digital Converter)

Greater natural gradation and amazingly rich pictures are delivered with 4096 steps of grey. The 12-bit analogue-to-digital converter has 4x the gradation found with a conventional 10-bit analogue-to-digital converter. Resulting in a faithful reproduction of details, so you can see for the first time, everything there is to see!

12 bit Analogue to Digital Converter

441 Hours Extended Recording Time with EP Mode

The innovative engine inside Panasonic Recorders assures long recording time combined with outstanding picture quality. Our  recorders offer the unique combination of outstanding picture quality and long recording time to either Hard Disk Drive or DVD. You can record up to 8 hours of material on a single-sided DVD or 14 hours 20 minutes onto a dual layer DVD.

Super Multi-Format Recording & Playback

Incredible recording versatility with Super Multi-Format recording and playback. You can enjoy recording of DVD-RAM, DVD-R, DVD-R DL, DV-RW, DVD+R, DVD+R DL, DVD+RW.

Digital Camera Linking through USB Terminal & SD Memory Card

DMR-XW350 is equipped with an SD Memory Card and USB terminal. This makes it easy to view photos from any digital camera that uses an SD memory Card or USB cable. Just slip the SD Memory Card into the card slot or use the cable to connect the camera to the DIGA recorder's USB terminal, and you're ready to enjoy a spectacular big-screen slide show with family or friends.

DV-Input for Easy Transfer from a Digital Video Camera

With the DMR-XW350 transferring material recorded on a Digital Video Camera is Quick & Easy. You can simply transfer digital recording to Hard Disk Drive or DVD while maintaining breaks in your recording. DV-Input is the ideal solution for those wishing to transfer material from a video camera while maintaining the high quality.

Direct Navigator for Easy and Quick Search

With Direct Navigator technology graphical user interface you  can find desired material on the hard drive quickly. Just press the direct navigator button to display thumbnails of all the programs on the hard disk drive or a DVD-RAM disc, then, select the one you want and press enter. It's that easy! and with "List Display" you can sort the programs by date or title.

Time Slip Function

Chasing Playback:

Set your Recorder to begin recording, then with Chasing Playback you can commence viewing the program at any stage during recording.

Simultaneous Recording & Playback:

Enjoy watching a pre-recorded program or DVD while recording two programs. You can conveniently catch up on the previous week's episode while recording this week's program.

16:9 Widescreen Recording

The DMR-XW350 will record 16:9 Aspect Ratio (Widescreen) when receiving Widescreen input from either HD or SD Digital broadcast transmission. Recording is performed as normal and you will be able to view full 16:9 format for playback.

Nick.

Currently rated 5.0 by 4 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

8 Years down…and still loving it

Tuesday, 2 February 2010 04:25 by Nick MacKechnie

Hi All,

2010, Welcome! This Thursday marks my 8th year at Microsoft New Zealand (so I’ll be enjoying my day off!). I started back in 2002 in our old Auckland office on Fanshawe Street and remember my first day very well.

I turned up to work in a suit and tie and Warrick Smith (my manager at the time) politely suggested I take the jacket off, and offered me a few Microsoft branded polo’s to wear. For a young chap, walking into this new environment from the traditional corporate world was both an exciting and intimidating experience. I had dealt with many Microsoft people over the years, their knowledge was wide and deep on their technologies as well as their integration with other platforms. The silence of people beavering away was deafening and being surrounded by people who were enthusiastic, passionate and smart has become something I’m extremely thankful for and thrive on - I was handed my laptop and asked to set it up, which in a corporate environment seemed weird, but something I appreciate upon reflection. We operate in what I call an organised chaos desktop environment (OCDE – I think I’ll add that to Wikipedia.org J) – there’s the corporate computer image you can deploy (we didn’t really have one back in those days), or you can build your own machine as long as it has a few core applications deployed and it’s service packed/patched appropriately. This was a far cry from my previous roles at Fletchers, where we (IT) mandated the SOE and controlled the technology stack from top to bottom.

I remember Warrick handing me my login ID and temporary password, and seeing my email address... Wow, now that’s cool, a microsoft.com email address. As I look back over the years, I count myself as very fortunate and lucky to be working here. I’ve learnt so much, and continue to do so on a daily basis through my internal and external interactions and engagements.

Things have changed a lot in terms of our image, reputation, the way we interact with partners and customers, listen and take on feedback, our technologies and services we offer. We learn from our mistakes (sometimes not as quickly as we would like) and genuinely want to make a difference in our domestic and international markets.

I still enjoy coming to work every day with the hope and desire to make a difference, to learn new things and help people – We all have an opinion, view, and experience to guide us – we should challenge the decisions of yesterday and today to validate that we are doing things for the right reasons and working for the best possible outcome. Because we’ve been doing things this way for the last year/s, doesn’t ensure we will meet the needs of tomorrow and that we are aligned to business goals and strategy.

So thanks for the last 8 years, and I’m sure I’ll be here for another!

Nick.

Currently rated 5.0 by 2 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Pictionaire, a new Multitouch Table from Microsoft Research

Tuesday, 2 February 2010 01:14 by Nick MacKechnie

 

A joint project from Microsoft Research and the University of California brings us another touchscreen, mutitouch table-top computing experience. Like a larger version of Surface, the Pictionaire, as it’s called, is also operated via human touch using gestures made on the table’s surface. However, unlike Surface, the camera used features a higher resolution - and it’s positioned above the computer’s screen, via a mount on the ceiling. With this setup, the camera can “see” the items placed on the table and when the item is removed, it can be replaced with a digital version. For example, if you place a keyboard on the table, the Pictionaire will pull up a text-entry box. If you place a sketchbook on the table, a digital version of the page soon appears. You can even do this process in reverse – the Pictionaire can project a digitized image onto the real life object, like the digital sketchpad image projected onto a piece of paper so you can trace it back onto the physical page.

To see the Pictionaire in action, check out the videos posted over on Slashgear. The Pictionaire will be demonstrated at the Computer Supported Cooperative Work conference in Savannah, Georgia, this month.

(via New Scientist)

Currently rated 1.0 by 1 people

  • Currently 1/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Rules for visiting NZ's South Island are:

Friday, 11 December 2009 00:49 by Nick MacKechnie

1. Pull your pants up. You look like an idiot.
2. Turn your cap right, your head ain't crooked.
3. Let's get this straight: it's called a 'gravel road.' I  drive a Ute because I want to. No matter how slow you drive, you're  gonna  get dust on your Lexus... Drive it or get out of the way.
4. They are cattle. That's why they smell like cattle. They smell like money to us. Get over it. Don't like it? SH1 goes north, find it and ....
5. So you have a $80,000 car. We're impressed... We have $250,000  harvesters that are driven only 3 weeks a year.
6. Every person in the South waves. It's called being friendly. Try to understand the concept.
7. If that cell phone rings while a bunch of geese/pheasants/ducks/quail are coming in during the season,  we WILL shoot it outta your hand. You better hope you don't  have it up to your ear at the time..
8. Yeah. We eat trout, salmon, deer and duck. You really want sushi and caviar? It's available at the corner bait shop.
9. The 'Opener' refers to the first day of duck season. It's a religious holiday, we will observe it.
10. We open doors for women. That's applied to all women, regardless of age.
11. No, there's no 'vegetarian special' on the menu. Order steak, or you can order the Chef's Salad and pick off the 2 pounds of ham and turkey.
12. When we set a table, there are three main dishes: meats, vegetables and breads. We use three spices: salt, pepper, and Watties Tomato sauce!  
13. You bring 'Coke' into my house, it better be brown, wet and served over ice. You bring 'Mary Jane' into my house, she better be cute, know how to shoot, drive a truck, and have long hair.
14. College and High School Rugby is as important here as the All Blacks, the Highlanders and the Crusaders and a heap more fun to watch.
15. Yeah, we have golf courses - but don't hit the water hazards - it spooks the fish.
16. Turn down that blasted car stereo! That thumpity -thump crap ain't music.  We don't want to hear it anymore than we want to see your boxers! Refer back to #1!
17.. For role models refer to the "Mainland Cheese" and "Speights" boys .......  'good on ya, mate'!

A true South Islander will send this to at least 10 others and a few new friends that probably won't get it, but we're friendly  so we share in the hope you can begin to understand what a real life is all about!!! :-)

Currently rated 2.6 by 8 people

  • Currently 2.625/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Categories:   New Zealand
Actions:   E-mail | del.icio.us | Permalink | Comments (1) | Comment RSSRSS comment feed

Exchange 2010 Active Sync Issue

Saturday, 21 November 2009 08:04 by Nick MacKechnie

Hi All,

I’ve spent the last few days migrating to Hyper-V, SQL 2008, Windows Server 2008 R2 and Exchange 2010 from 3 machines - Windows Server 2003, SQL 2005 and Exchange 2003. The last thing I had to turn on/get going was Active-Sync for syncing mail with home via a mobile device. This failed miserably, as per the below event log on my Exchange 2010 Server.

Log Name:      Application

Source:        MSExchange ActiveSync

Date:          11/20/2009 12:23:07 PM

Event ID:      1053

Task Category: Configuration

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      <server>.thenet.gen.nz

Description:

Exchange ActiveSync doesn't have sufficient permissions to create the "CN=<name>,OU=<OU Name>,DC=thenet,DC=gen,DC=nz" container under Active Directory user "Active Directory operation failed on <server>.thenet.gen.nz. This error is not retriable. Additional information: Access is denied.

Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0

".

Make sure the user has inherited permission granted to domain\Exchange Servers to allow List, Create child, Delete child of object type "msExchangeActiveSyncDevices" and doesn't have any deny permissions that block such operations.

Details:%3

Event Xml:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

  <System>

    <Provider Name="MSExchange ActiveSync" />

    <EventID Qualifiers="49156">1053</EventID>

    <Level>2</Level>

    <Task>2</Task>

    <Keywords>0x80000000000000</Keywords>

    <TimeCreated SystemTime="2009-11-19T23:23:07.000000000Z" />

    <EventRecordID>9577</EventRecordID>

    <Channel>Application</Channel>

    <Computer><server>.thenet.gen.nz</Computer>

    <Security />

  </System>

  <EventData>

    <Data>CN=<name>,OU=<OU Name>,DC=thenet,DC=gen,DC=nz</Data>

    <Data>Active Directory operation failed on <server>.thenet.gen.nz. This error is not retriable. Additional information: Access is denied.

Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0

</Data>

  </EventData>

</Event>

The work around was pretty simple, however took me some time trolling through external and internal Knowledge Base Articles. I came across this article, however it didn’t seem to address the issue.

Here’s how I managed to get it sorted -

On a Domain Controller, Click on Start/All Programs/Administrative Tools/Active Directory Users and Computers

Capture1

Click on View and Select Advanced Features

Select a mailbox that isn’t working with Active Sync, double click on the account, Select the Security Tab and then the Advanced Button.

Capture2

Select Exchange Servers, and tick the Include inheritable permissions toggle then Apply and OK.

Capture

This issue is currently bugged and is likely to be fixed with an update in the future – It seems to be a symptom of ‘upgrading’.

Nick.

Currently rated 4.0 by 148 people

  • Currently 3.986488/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

What is SkyDrive Explorer

Friday, 6 November 2009 23:23 by Nick MacKechnie

SkyDrive Explorer is a free, easy-to-use, but very powerful extension for Windows Explorer. With SkyDrive Explorer you can make any every-day operations with your documents from Microsoft Live SkyDrive™ service (read more...) using Windows Explorer, as if they were on your computer.

Moreover you don't need to install and configure any additional programs or ActiveX components. SkyDrive Explorer will organize the interaction with the online storage itself.

Features

Multifunctional
Multifunctional

With the current beta version you can enjoy the following functionality:

  • View the structure and contents of folders in SkyDrive™;
  • View files information (type, size, creation date in GMT format);
  • Create new root folders and subfolders;
  • Copy files into the storage;
  • Delete files and folders;
  • Copy files from the storage to the computer;
  • Copy folders and subfolders from the storage to the computer keeping their structure;
  • Use Drag & Drop for files operations;
  • Rename files and folders;
  • Create links to SkyDrive™ folders on your computer;
  • Copy URL of the selected object(s) to the Clipboard; New
  • Automatic check for the latest version;New
  • Bidirectional languages support.New
Fast
Perfomance

SkyDrive Explorer allows applying some operations for group of objects that is not possible in web browser. This increases performance of work with SkyDrive™.

Examples of multi-operations are:

  • Renaming objects;
  • Deleting group of objects;
  • Copying folders with subfolders and files from SkyDrive™.
Easy
Easy

You don't need to know how to work with the SkyDrive™ service in web browser. To work efficiently with your data in SkyDrive Explorer you just use base operations with files and folders in Windows Explorer.

Secure
Secure

SkyDrive Explorer uses the standard Microsoft library for work with Windows Live Id services. Your personal information does not leave this library and even is not passed to SkyDrive Explorer engine. Also, the traffic with online storage goes through HTTPS protocol that protects data from snoopers.

Cross-platform
32/64 bit OS support

SkyDrive Explorer works both in 32- and 64-bit Microsoft® Windows OS. Minimal required OS is Windows XP, and SkyDrive Explorer will successfully work in Windows Vista, Windows Server 2003 and 2008, and Windows 7.

SkyDrive Explorer 1.2 Beta has been released, download here.

Currently rated 1.2 by 5 people

  • Currently 1.2/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Windows XP Mode for Windows 7 Goes RTM

Monday, 5 October 2009 09:57 by Nick MacKechnie

Hi All,

Windows XP Mode just hit RTM status this week and will be made available for download later this month in its final version. Once installed, this optional Windows 7 feature will let anyone run their XP-only applications which wouldn’t otherwise work on the new operating system. Designed primarily for small businesses who sometimes run mission-critical apps that are not updated to work with new versions of Windows, XP Mode adds a virtualization layer comprised of the Windows Virtual PC engine a licensed copy of Windows XP Service Pack 3 running as a virtual machine, both of which will be made available for download. Larger businesses will likely use MED-V which will offer XP Mode in its new version due to be released in beta 90 days after the Windows 7 public release.

Programs running in XP Mode will can be launched right from the Windows 7 desktop and even integrate with Windows 7 features like the Taskbar’s “jump lists” which show recently used files and common tasks.  In order for XP Mode to run, PCs are required to have at least 2 GB of memory and a system that has chip-level virtualization from either Intel or AMD.

Nick

Currently rated 5.0 by 1 people

  • Currently 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5

Office Communication Server – Federation makes sense!

Thursday, 3 September 2009 00:42 by Nick MacKechnie

Hi All,

Now that Office Communication Server R2 is out, there are a heap of customers piloting and indeed deploying OCS. I thought I’d share a few thoughts around why you should consider federating with your business partners and other IM service providers. I work in the support part of our organisation, and for me, encouraging my customers to federate with Microsoft makes perfect sense both from a business partner (being able to engage directly with your account team) perspective as well enabling us to support our customers better.

Here are a few reasons why you should consider federation:

· The ability to see if business partners are online, their presence, availability

· Share information easily via Instant Messaging – share documents, URLS, quick questions/responses/escalations

· Ability for 3rd parties to see application/environmental issues via shared desktops which should drive down response/incident resolution times

· Reduce phone costs by calling peer to peer instead of traditional POTS

· Ability to quickly and easily setup a conference call/Live meeting session for collaboration

· Ability to manage IM, audit, monitor and manage IM traffic

· Ability to build virtual teams across organisations or with 3rd parties with a common goal – e.g.: Universities or companies working on joint projects or teams that are geographically separated.

Federation is an important goal for the Office Communications Server team and they are excited to announce several changes to public IM federation between Office Communications Server and public IM networks, effective July 1, 2009:

· The Live Communications Sever Public IM Connectivity (LCS PIC) license will be renamed Office Communications Server Public IM Connectivity (OCS PIC) license.

· Customers with Office Communications Server 2007 R2 Standard CAL or Office Communications Server 2007/Live Communications Server 2005 SP1 Standard CAL with Software Assurance will no longer require an additional license to federate with Windows Live.  (A license will still be required for federation with AOL & Yahoo!.)

· With Windows Live federation, customers will be able to add Windows Live contacts to their Office Communicator contact list, view presence and send and receive instant messages.

Microsoft will continue to work with our partners to enable more options that allow you to communicate seamlessly with customers, partners, friends and family on different networks. For more information on public IM connectivity with Office Communications Server, please go to http://www.microsoft.com/communicationsserver/en/us/public-im-connectivity.aspx.

Our Unified Communications Product team are also on Twitter http://twitter.com/ucteam.

Federation provides your organization with the ability to communicate with other organizations Access Edge Server to share IM and presence. You can also federate with an audio conferencing provider using either of the two following methods. The process of configuring federation with an organization or an audio conferencing provider is identical. For a list of supported ACPs, see http://r.office.microsoft.com/r/rlidOCS?clid=1033&p1=ACP.

If you have enabled federation on the Access Edge Server, access by federated partners, including audio conferencing providers (ACPs), is controlled using one of the following methods:

  • Allow automatic discovery of federated partners. This is the default option during initial configuration of an Access Edge Server because it balances security with ease of configuration and management. For example, when you enable automatic discovery of federated partners on your Access Edge Server, Office Communications Server 2007 allows any federated domain to send communications with you and automatically evaluates incoming traffic from federation partners and limits or blocks that traffic based on trust level, amount of traffic, and administrator settings.
  • Allow discovery of federated partners, but grant a higher level of trust to specific domains or Access Edge Servers that you specify on the Allow list. For example, if you want to grant a higher level of trust to partners using the SIP domain contoso.com and fabrikam.com, you would add these two domains on the Allow tab. Restricting discovery in this way establishes a higher level of trust for connections with the domains or Access Edge Servers that you add to your Allow list, but still provides the ease of management that is possible by discovering other federation partners that are not listed on the Allow tab.
  • Do not allow discovery of federation partners and limit access of federated partners to only the domains or Access Edge Servers for which you want to enable connections. Connections with federated partners are then allowed only with the specific domains or Access Edge Servers you add to the Allow tab. This method offers the highest level of security, but does not offer ease of management. For example, if an FQDN of an Access Edge Server changes, you must manually change the FQDN of the server in the Allow list.

How Federated Traffic Is Evaluated When Using Automatic Discovery

If you choose to use automatic discovery of federated partners, the Access Edge Server automatically evaluates incoming federated traffic in the following way:

If a federated party has sent requests to more than 1000 URIs (valid or invalid) in the local domain, the connection first placed on the Watch list. Any additional requests are then blocked by the Access Edge Server. If the Access Edge Server detects suspicious traffic on a connection, it will limit the federation partner to a low message rate of 1 message per second. The Access Edge Server detects suspicious traffic by calculating the ratio of successful to failed responses. The Access Edge server also limits legitimate federated partner connections (unless added to the allow list) to 20 messages/sec.

If you know that you will have more than 1000 requests sent by a legitimate federated partner or a volume of over 20 messages per second sent to your organization, to allow these volumes, you must add the federated partner to the Allow tab.

After configuring federation, you can use Office Communications Server 2007 administrative tools to monitor and manage federated partner access on an ongoing basis. For more information, see the

Introduction to Microsoft Office Communications Server 2007 Administration Guide.
Enabling discovery of federated partners

If you did not enable discovery of federated partners when you configured your Access Edge Server, you can use the Computer Management snap-in to do so. If you already selected this option during setup, you do not need to perform this step.

To enable discovery of federated partners

1. Log on to the Access Edge Server as a member of the RCT Local Administrators group or a group with equivalent user rights.

2. Open Computer Management. Click Start, click All Programs, click Administrative Tools, and then click Computer Management.

3. In the console tree, expand Services and Applications, right-click Microsoft Office Communications Server 2007, and then click Properties.

4. On the Access Methods tab, select the Allow discovery of federated partners check box.

Add a Trusted Federated Partner

Use the following procedure to add a trusted federated partner domain and optionally the FQDN of its Access Edge Server, use the following procedure.

To add a trusted federated partners

1. Log on to the Access Edge Server as a member of the RTC Local Administrators group or a group with equivalent user rights.

2. Open Computer Management. Click Start, click All Programs, click Administrative Tools, and then click Computer Management.

3. On the Allow tab, click Add.

4. In the Add Federated Partner dialog box, do the following:

    • In the Federated partner domain name box, type the domain of each federated partner domain.
    • In the Federated partner Access Edge Server box, optionally type the FQDN of each Access Edge Server that you want to add to your Allow list. Remember if you configure the FQDN of a partner's Access Edge Server and the FQDN changes, you must manually update your configuration for this partner.
    • Click OK.

5. Repeat this procedure for each federated partner you want to add to your Allow list, and then click OK.

For more information, please check out this link - http://technet.microsoft.com/en-us/library/bb663635.aspx

Office Communications Server 2007 R2 gives organisations the features and tools they need to streamline communications while increasing operational control, all without expensive infrastructure and network upgrades.

Find more information about Office Communications Server 2007 R2 by accessing our catalog of technical resources, documents, and experts.

Review product information on everything from new features to migration and deployment.

Take advantage of our learning offerings including webcasts, training courses and virtual labs.

Need technical support? Microsoft can answer your questions. Find information about troubleshooting issues or ask an expert.

Try It

clip_image002Trial Software

Try a fully functional version of Office Communications Server 2007 R2 in your own environment.

clip_image003

clip_image004Virtual Hard Drive

The Microsoft VHD Test Drive Program provides customers with an enhanced server-based software evaluation experience that’s faster, better supported, and more flexible. You can now access the entire catalog of pre-configured Microsoft and partner products and solutions in the VHD format and start evaluating and testing today.

clip_image005

clip_image002[1]Unified Communications Hosted Trial

Experience the end-user features of Microsoft’s unified communications technologies without installing any hardware or software. Microsoft’s UC Hosted Trial allows you to sign up for a free five day trial of Office Communications Server 2007 R2 and Exchange Server 2007.

clip_image006

clip_image004[1]Virtual Labs

Experience Office Communications Server and discover how you can streamline communications for your users, experience the flexibility and control you need to manage your communications infrastructure, and provide an extensible platform for communications-enabled business processes.

clip_image007

Nick.

Be the first to rate this post

  • Currently 0/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5